- Bi-Directionally Converts Synchronous RS-530 to V.35
- Supports Data Rates to 2 Mbps, Full or Half Duplex
- Transparent to Protocol
- No AC Power or Batteries Required
- Various DCE/DTE and Gender Combinations Available
- DB-25 and M/34 Connectors with Integral 6 foot (1.8m) Cable
- Circuitry Housed in a Miniature Case
The Patton Model 2014 RS-530 to V.35 converter lets a synchronous RS-530 device communicate bi-directionally with a synchronous V.35 device. The Model 2014 requires no AC power or batteries to operate and supports data rates to 2 Mbps. Operating full or half duplex, the Model 2014 passes all necessary clocking and control signals, and is transparent to protocol.
The Patton Model 2014 connects directly to the synchronous RS-530 interface using a male or female DB-25 connector. A male or female M/34 connector at the end of an integral 6 foot (1.8m) cable plugs into the V.35 device. Models with any combination of DTE and DCE wiring are available, thus eliminating the need for special crossover cables.

Model 2014N
If your converter application does not require a built-in cable, here's the perfect solution!

|