| Application: |
64K G.703 co-directional PCM network or CSU/DSU conversion |
| G.703 Interfaces: |
64 kbps symmetrically balanced 4-wire pair, 120 ohm terminated to a female RJ-45 |
| DTE Interface: |
V.35, X.21, G.703, Data+Voice, Ethernet Bridge |
| Data Rates: |
Rate adaptation for asynchronous data rates |
| Operating Modes: |
256k rate co-directional timing, Rx recovered; 64 kbps+500ppm (clear channel); or with BPV for Octet timing mode to communicate over a 128 kbps link (preservation of byte integrity) |
| Diagnostics: |
local analog loopback, remote digital loopback, V.52 compliant bit error rate pattern (511/511E pattern) generator and detector with error injection mode |
| Line Coding: |
AMI |
| Clocking: |
Internal, external or network clock |
| G.703 Input Signal Level: |
0 to -10 dB, 2V differential, nominal |
| Jitter Performance: |
CTR14, G.823 |
| LED Status Indicators: |
Power, TD, RD, RTS, CD, TM (test mode), ER (error) IM status alarm, IM active and IM ok |
| Isolation: |
Minimum 3000V RMS via custom transformers |
| Surge Protection: |
600W power dissipation |
| Range: |
1.0 mile (1.6 km) |
| Power: |
100-240 VAC, 50/60 Hz (universal input option); 48 VDC (option). 5 watts |
| Dimensions: |
7.3" x 6.6" x 1.62" (18.5 x 16.8 x 4.1 cm) |
| Weight: |
Standalone 0.4 lbs (0.18 kg) without power suppply; Rack card: 0.3 lbs (0.14 kg) with rear card |
| Dimensions: |
48.25 W x 32.00 D x 4.44 H cm (19.00 W x 12.60 D x 1.75 H inches) |
| Weight: |
2.02 lbs (.92 kg). |
