Model 2710RC
T1/FT1, High Density, Low Cost, CSU/DSU Rack Card
New T1/Fractional T1 CSU/DSU rack cards connect to a space-saving, SNMP-manageable platform
Need Help? Call VitaIP at +240 643 2122 or e-mail sales@VITAIP.com  
   


  • Terminates T1/FT1 circuits over a 4-wire RJ-48C interface
  • Connects to standard CPE serial interfaces
  • Common framed n x 56/64 kbps rates up to 1.536 Mbps
  • Unstructured rates at 1.544 Mbps
  • D4 or ESF framing modes
  • Supports AMI or B8ZS/B7ZS line coding
  • Software or DIP switch configurable
  • Internal, external, or receive recover clocking
  • Also functions as a high-speed point-to-point modem
  • Made in USA

The NetLink Model 2710RC Series are T1/FT1 CSU/DSUs that provide high-speed WAN connectivity in a rack card package. Patton's 2U (8.9-cm) redundant AC/DC rack chassis accepts up to 16 rack cards, saving valuable space in central site locations. Netlink 2710RC is an excellent choice for terminating leased lines, Frame Relay backbones, Internet access, and LAN-to-LAN services. When terminating a T1- dedicated digital circuit, the NetLink 2710RC supports n x 56 kbps and n x 64 kbps framing for T1 and V.35, X.21, RS-530, or 10Base-T Ethernet interfaces. The Netlink 2710RC supports D4/ESF framing options and AMI/B8ZS/B7ZS line coding. Data rates, framing, and coding options are programmed by DIP switches or from a VT-100 terminal with menu-driven software. The Netlink 2710RC also supports SNMP management from a NetLink Model 1001MC SNMP/HTTP rack card. A full range of system and diagnostic features make setup simple and easy. 2710RC

WAN Speed: 1.544 Mbps
WAN Connection: RJ-48C
Nominal Impedance: 100 Ohms
DTE Data Rates: EIA-530, V.35, X.21, Ethernet
Line Coding: AMI/B8ZS
Line Framing: D4/ESF/Unframed
Clock Options: Internal, external, or network
Diagnostics: Responds to CO-initiated D4 loop-up and loop-down codes, ESF line loop and payload loop FDL messages, and Universal Loopback de-activate messages
Transmit LBO: Selectable—0, 7.5, 15, or 22.5 dB, plus DSX-1
Standards: AT&T TR62411, TR54016, and ANSI T1.403
Dimensions: 0.78H x 2.1W x 3.5D in. (2.0H x 5.3W x 8.9D cm)
Test Modes: Initiates and responds to V.54 and CSU remote loops; local loop
Pattern Generator/Detector: User selectable 511, 2047, or QRSS


2710RC/A/I T1/FT1 NTU RC, W/V.35 F INTERFACE
2710RC/B/B T1/FT1 NTU RC, W/EIA-530 INTERFACE
2710RC/C/IA T1/FT1 NTU RC, W/ETHERNET
2710RC/D/V T1/FT1 NTU RC, W/X.21 INTERFACE

WAN Routers
IPLink™ Model 2603 Low-cost T1/E1 WAN Access Router
IPLink™ Model 2620 High Speed Dual Port WAN Router with Drop & Insert
IPLink™ Model 2621 & 2635 Low-cost WAN Access Routers with V.35 or X.21 Interface
IPLink™ Model 2802 & 2805 Managed VPN Routers
IPLink™ Model 2803, 2821, & 2835 Managed Serial VPN Routers
IPLink™ Model 2823 Managed DMZ Secure Router
IPLink™ Model 2884 Channelized Gigabit T1/E1 Router
IPLink™ Model 2888 2/4-Port Bonded T1/E1 Multi-Megabit Inverse Multiplexer


Copyright © 2007 VitaIP. All rights Reserved | Home Page | About VitaIP | Site Map | How to Buy | Search | Disclaimer