Model 3010
Modem Sharing Device
Lets Three RS-232 DTEs Contend for Access to One RS-232 Modem or Multiplexer

Need Help? Call VitaIP at +240 643 2122 or e-mail sales@VITAIP.com  
   


  • Asynchronous or Synchronous Operation (Transparent to Protocol)
  • No AC Power or Batteries Required
  • Supports Data Rates to 38.4 Kbps
  • Prioritized Monitoring Scheme Uses RTS Contention
  • Modem Transmits in Parallel to Each Connected DTE Device
  • Works with POS Terminals and ATMs
  • Miniature Size Plugs into Modem Port
The Patton Model 3010 modem sharing device lets three RS-232 DTEs contend to transmit data to one DCE such as a modem or mux. Supporting asynchronous or synchronous data rates to 38.4 Kbps, the Model 3010 passes data and control signals in parallel from the modem to all three DTEs. Each DTE may also raise RTS to contend for the right to transmit exclusively to the modem. If two DTEs raise RTS simultaneously, the Model 3010 prioritizes access by port (1-2-3). The Model 3010 requires no AC power or batteries, no configuration, and plugs directly into the modem or multiplexer's DB-25 port.


Data Rates: 300 bps to 38.4 Kbps
Transmission Format: Asynchronous or synchronous (transparent to protocol)
Transmission Mode: Full or half duplex
Contention Method: Controlled by RTS
Interface: EIA RS-232 / CCITT V.24
Connectors: DB-25 male on modem (DCE) interface, DB-25 female on DTE interfaces
Power: Derived from RS-232 data and control signals, no AC power or batteries required
Dimensions: 3.13" x 2.11" x 1.20" (8 x 5.4 x 3 cm)
Temperature Range: 32° to 122°F (0° - 50°)
Altitude: 0-10,000 feet (4.5 km)
Humidity: 5 to 95% non-condensing


3010 SHARING DEVICE



Copyright © 2007 VitaIP. All rights Reserved | Home Page | About VitaIP | Site Map | How to Buy | Search | Disclaimer