Model 410
Twinax to Twisted-Pair Adapter (Balun)

Need Help? Call VitaIP at +240 643 2122 or e-mail sales@VITAIP.com  
   


  • Male connectors for the Twinax connection; RJ-11 or RJ-45 and screw terminals for the twisted pair (both included)
  • Data bandwidth of .5 to 5 Mbps (500 Kbps to 5 Mbps)
  • Range of up to 1000 feet (300m) of twisted pair - 24 gauge (.5mm)
Installing Twinax for IBM Systems 34/36/38 and AS/400 can be a headache! The cable is not only cumbersome to run through walls and over ceilings, it's also expensive! With the Patton Electronics Model 410, you can use regular, inexpensive twisted pair telephone wire instead of Twinax cable. It's cheap and easy to handle.


Connectors: Male connectors for the Twinax connection; RJ-11 or RJ-45 and screw terminals for the twisted pair (both included
Equipment: 5362, 5251, 5291 and all other terminals supported by the AS/400 and System 34-36-38 using twinax cable
Range: 1000 feet (300m) of twisted pair - 24 gauge (.5mm)
Transmission: Transparent to user
Data Bandwidth: .5 to 5 Mbps (500 Kbps to 5 Mbps)
Link-to-Data Isolation: 500 volts AC/DC
Temperature Range: 0° to 54°C (32° to 122°F)
Storage Temperature: 0° to 185°F
Humidity: To 95% Non-condensing
Dimensions: 5 long (12cm) x 1 (2.cm) diameter


410 MC TWNAX TO TWISTED PAIR W/CABLE
410M11 TWINAX BALUN W/ RJ-11 JACK
410M11P TWINAX BALUN W/ RJ-11 ON 6ft CAB
410M11TB TWINAX BALUN W/ RJ-11 AND TB
410M45 TWINAX BALUN W/ RJ-45 JACK
410M45TB TWINAX BALUN W/ RJ-45 AND TB
410MTB TWINAX BALUN W/ TERM. BLOCK


Copyright © 2007 VitaIP. All rights Reserved | Home Page | About VitaIP | Site Map | How to Buy | Search | Disclaimer