ipRocketLink™ Model 3086
G.SHDSL Router-Modem with Serial WAN & Ethernet Interfaces
Get any-to-any connectivity with the Model 3086 ipRocketLink, and offer 2-wire standards-based transmission with TDM, WAN, and Ethernet/IP for fast, dedicated, always-on access.

Need Help? Call VitaIP at +240 643 2122 or e-mail sales@VITAIP.com  
   


  • nx64 Speeds to 2.3/4.6 Mbps (4.0 Mbps on T1/E1 models)--User-selectable data rates for TDM, WAN, or Ethernet/IP ports. Use as a standalone or with the ForeFront Access system
  • 10/100Base-T port for routed or bridged IP data, and choice of one V.35, X.21, or T1/E1 port for TDM data.
  • Built-in Ethernet/IP Router Standard--With Patton's FlexIP architecture, split the bandwidth and use both interfaces at the same time
  • Transparently pass VLAN tagged Ethernet frames.
  • Get ATM, PPP, and Frame Relay--Versatile interface options allow for simple deployment into any network environment
  • Interoperable with Third-Party DSLAMs--Take advantage of Patton reliability whether you connect back-to-back or to a third-party DSLAM.
  • LEDs and Full V.52/V.54 Diagnostics--Easy-to-access toggle switches let you test the link with built-in test modes. LEDs provide clear status at-a-glance
  • WWW/SNMP Manageable--Built-in VT-100 console port makes setup a snap, and you can use the embedded HTTP/SNMP agent to manage the Model 3086 from anywhere in the world.


The Patton Model 3086 ipRocketLink IAD redefines access and sets the new standard for customer premise equipment. Based on European Telecommunications Standardization Institute (ETSI) and International Telecommunications Union (ITU) G.SHDSL G.991.2 standard, the Patton 3086 ipRocketLink enables 2.3/4.6 Mbps speeds (4.0 Mbps on T1/E1 models) at nx64 (n=1..36/72) over a single pair of wires while combining standards-based transmission with TDM(V.35, X.21, or T1/E1), Ethernet, and high speed IP routing...all in one compact package.

With Patton's FlexIP™ architecture, the Model 3086 offers a V.35,X.21, or T1/E1 interface and 10/100 Ethernet ports. The Ethernet port enables access to any IP network via ATM, PPP, or Frame Relay while the TDM port transparently carries traffic to a data or voice network. Both interfaces can be simultaneously selected with user-defined bandwidth for each port.

The 3086 boasts easy installation with DIP switch, Telnet, and WWW/SNMP management. It provides bridging and routing functionality, along with advanced IP features like NAT and Firewall, and optional IPSec-based VPN. As part of Patton's family of ipDSL products, the Model 3086 offers a complete, managed, end-to-end system when used with Patton's central site access concentrators.

*Frame Relay encapsulation over DSL for Ethernet traffic is supported with the purchase of a separate license key.*



While Frame Relay remains the most economical service to connect multiple corporate locations over PVCs (Private Virtual Connections ) at burst and fixed data rates, high-speed DSL is becoming the technology of choice for last mile access to FR networks.Patton's Model 3086 is the flexible and economical customer premise solution to provide direct FR and IP connectivity for small and medium size branch offices.
Model


DSL: G.991.2 ITU G.SHDSL Annex A and Annex B, G.994.1 G.hs. nx64 data rates over 2-wire full-duplex to 2.3 Mbps, symmetrical, TC-PAM encoding. Distance of 32,000 ft (9.8 km) at 192 kbps to 18,000 ft (5.6 km) at 2.312 Mbps.
DSL Connection: Shielded RJ-11F isolation per IEC 950
Ethernet Connection: 10/100Base-T, auto-sensing, full/half-duplex operation, built-in MDI-X
TDM Interface: V.35-M/34F, X.21-DB15F (DCE/DTE), T1-RJ48C, E1-RJ48C and dual BNC
Management: EIA-561 RJ-45 RS-232, VT-100 CLI, TELNET, Embedded WEB/HTTP, SNMP, Logging or SMTP on events: POST, POST errors, line/DSL, PPP/DHCP, IP MPOA AAL5 and Bridged encapsulation RFC 2684 and RFC 1577 IPoATM. LLC/VC Mux support.
ATM Support: UNI 3.0, 3.1, and 4.0 ATM QoS with UBR/CBR/nrt-VBR/rt-VBR and per-VC queuing and shaping.
Peak cell rate shaping on a per-VCC basis up to 32 active VCCs
I.610 OAM network management including AIS/RDI, loop-back and performance monitoring.
Protocol: Enhanced ILMI 4.0 for auto-configuration of ATM PVCs, IP (RFC 741), TCP (RFC 793), UDP (RFC 768), ICMP (RFC 950), ARP (RFC 826). IP Router with RIP (RFC 1058), RIPv2 (RFC 2453), OSPF (RFC 2328) Integrated DHCP Server (RFC 2131). Selectable IP leases and MAC/IP pairings. DHCP relay agent (RFC 2132/RFC 1542) with 8 address pools. DNS Relay. IGMP v1 and v2. IP-in-IP (RFC-2003) encapsulation, Ethernet Bridging.
NAT/NAPT with integrated application support, MultiNat with 1:1 mapping, Many:1, Many:Many mapping, NAT Port/IP redirection and mapping.
Security: DoS Detection/protection. Intrusion detection, Logging of session, blocking and intrusion events and Real-Time alerts, Password protected system management with a username/password for console and virtual terminal, Packet filtering firewall for controlled access to and from LAN/WAN. Support for 255 rules in 32 filter sets. 16 individual connection profiles. Access list determining up to 5 hosts/networks which are allowed to access management system SNMP/HTTP/TELNET
Indicators: LEDs: DSL Link; Sync Serial: TD, RD, CTS, DTR; T1/E1: Link, LOS, TD, RD; LAN: TX, RX, 100M Link; Status: NS, ER, TM.
Power Supply: Internal universal 90 - 260 VAC input or 48 VDC input. Optional external power availale.
Compliance: FCC Part 15A, FCC Part 68, CTR-12, CTR-13,CE Mark, EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC, EN60950, EN55022 (CISPR 22)
Environment: Temperature: 32 - 122°F (0 - 50°C); Humidity: 5 - 90%, non-condensing
Dimensions: 7.3" x 6.6" x 1.62" (185mm x 168mm x 41mm).
Compliance: Safety: UL/CSA per UL1950 (METS) Canadian cMET and CS-03. EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC (EN 60950), FCC Part 15, CE Mark, CTR12, CTR13, FCC Part 68.
Environment: Operating temperature: 0 - 40°C (32 - 104°F); Humidity: 5 - 90% non-condensing
Dimensions: 4.17W x 1.52Hx5.0L in. (10.6W x3.9H x12.7L cm)


3086/RIC/48 G.SHDSL IAD W/V.35(M34)+ETH,48VDC
3086/RIC/UI G.S IAD W/V35/M34+ETH; 120-220VAC
3086/RICA/UI G.S IAD W/V35/DB25+ETH; 120-220VAC
3086/RID/48 G.SHDSL IAD W/X21+ETH; 48VDC
3086/RID/UI G.S IAD W/X21+ETH INTERNAL 120-220VAC
3086/RIK/48 G.SHDSL IAD w/ETH+E1(RJ45/BNC) -48VDC

ForeFront Chassis
Model 6276 CompactPCI 2U System
Model 6476 CompactPCI 4U System
Model 6676 CompactPCI 9U System
ForeFront DACS
Model 2616RC 16-Port Digital Cross Connect
Model 6511 Matrix Switch with Gigabit Ethernet
ForeFront DSL
Model 3096RC 16-Port G.SHDSL TDM Concentrator
Model 3101RC ADSL2/2+ Triple-play Access IPDSLAM Module
Model 3196RC 16-Port iDSL TDM Concentrator
Model 6081RC IP Router/VLAN Aggregator
ForeFront RAS
Model 3125RC ForeFront™ RAS
G.SHDSL CPE
DiamondLink™ Model 3201 & 3241 G.SHDSL High-Speed Routers
ipRocketLink™ Model 3087 Serial G.SHDSL Bridge/Router
Model 3086FR G.SHDSL FR/PPP Over ATM IAD
Model 3088 RocketLink™-G G.SHDSL NTU
Model 3088FR G.SHDSL FRF.5/FRF.8 over ATM NTU
G.SHDSL Packet Aggregation
Model 3224 G.SHDSL Router & IpDSLAM
iDSL CPE
Model 1082 iDSL Modems With V.35, X.21, 10Base-T (Ethernet), or Co-directional 64 kbps G.703 Interfaces
Model 1092A KiloModem™ 2B1Q Encoding, 2- or 4-Wire, Baseband Modem
iDSL TDM Aggregation
Model 3092 iDSL Digital Cross Connect Provides Quad T1/E1 & 24 iDSL Ports
mDSL/sDSL Aggregation
Model 3095 Product not recommended for new installations.
For the next-generation alternative, please see Patton's
Model 3224 G.SHDSL IpDSLAM.
VDSL Aggregation
Model 3324 VDSL Access Concentrator/Switch
VDSL CPE
Model 1058 VDSL High Speed Data & Voice Modem
Model 1068 Variable Rate VDSL Modems


Copyright © 2007 VitaIP. All rights Reserved | Home Page | About VitaIP | Site Map | How to Buy | Search | Disclaimer